User manual

Provider Manual
30
6.2.2 NAVIGATING THE USER DISPLAY SCREENS
You can navigate the rest of the user display screens by pressing the Left
and Right User keys.
You can change the settings on any of the display screens by pressing
the Heat and Ramp keys to increase or decrease the setting.
Figure 6–7 shows how to navigate the user display screens.
Right User
Key
Right User
Key
Right User
Key
Left User
Key
Left User
Key
Left User
Key
Only displayed if the Flex setting
is not equal to zero.
Only displayed if the Flex setting is equal
to zero and the Mode setting is NOT set to CPAP.
Only displayed if the Ramp Length
setting is greater than zero.
Flex Parameter Screen
Rise Time Parameter Screen
Ramp Start Pressure Parameter Screen
LED Backlight Parameter Screen
Figure 6–7 Navigating the User Display Screens