User manual

Provider Manual
27
c. The third screen to appear is the Blower Hours screen, which
displays the blower hours time meter:
Figure 6–3 Blower Hours Screen
NOTE: With the exception of the Pressure On/Off button, the keypad
is inactive during these first three screens. Each of these first
three screens appears for approximately 1-3 seconds.
d. The next screen that appears is the Standby screen, shown in
Figure 6–4. This indicates that the Harmony is in the Standby
state.
Figure 6–4 Standby Screen
2. Press the Pressure On/Off button to put the unit into the Operate
state. The Monitoring screen, shown in Figure 6–5, appears.
Figure 6–5 Monitoring Screen
The Monitoring screen displays the actual measured pressure along
with the appropriate icons.