User manual

Provider Manual
26
CHAPTER 6: OPERATING THE HARMONY
This chapter explains how to start the Harmony and change the device
settings.
6.1 STARTING THE HARMONY
1. Plug the Harmony in to power up the unit. The Harmony sounds a
confirmation alarm and the keypad buttons light up.
NOTE: If the alarm does not sound or the buttons do not light up, the
Harmony requires servicing. Contact your home care pro-
vider.
Several screens appear initially during this step:
a. The first screen that appears is the Self Test screen, shown in
Figure 6–1. This is the internal test performed by the Harmony.
Figure 6–1 Self Test Screen
b. The next screen displays the software version, as shown in
Figure 6–2:
Figure 6–2 Software Version Screen