User manual

Provider Manual
25
1. Plug the DC boost converter into the rear of the Harmony, as shown
in Figure 5–8.
2. Leaving a small amount of slack in the cord, press the cord into the
DC cord retainer.
3. Connect the DC cord to the appropriate DC source. See the instruc-
tions that came with the DC boost converter for proper DC connec-
tions.
CAUTION: When DC power is obtained from a vehicle battery, the
Harmony should not be used while the vehicle’s engine is
running. Damage to the vehicle may occur.
DC Power Source
Figure 5–8 Plugging in the DC Boost Converter