User manual

BiPAP S/T user manual

Recommended Separation Distances between Portable and Mobile RF Communications Equipment

and This Device: The device is intended for use in an electromagnetic environment in which

radiated RF disturbances are controlled. The customer or the user of this device can help prevent

electromagnetic interference by maintaining a minimum distance between portable and mobile RF

communications equipment (transmitters) and this device as recommended below, according to

the maximum output power of the communications equipment.

Rated Maximum Power

Output of Transmitter

Separation Distance According to Frequency of Transmitter

150 kHz to 80 MHz

d = 1.2

80 MHz to 800 MHz

d = 1.2

800 MHz to 2.5 GHz

d = 2.3

0.01 0.12 0.12 0.23

0.1 0.38 0.38 0.73

1 1.2 1.2 2.3

10 3.8 3.8 7.3

100 12 12 23

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated

using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts

(W) according to the transmitter manufacturer.

Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reection from structures,

objects, and people.