User manual

BiPAP S/T user manual
28
Alarm LED Indicators
The Alarm Silence/Indicator button lights up as follows whenever an
alarm is detected:
Red Flashing Indicator – High priority alarm is detected. •
Yellow Flashing Indicator – Medium priority alarm is •
detected.
Yellow Solid Indicator – Low priority alarm is detected. •
The Alarm Silence/Indicator button does not light up when
informational messages display.
Alert Audible Indicators
An audible indicator sounds whenever a power failure or a high,
medium, or low priority alarm is detected. Additionally, an audible
indicator sounds for informational messages and to conrm that
certain actions have occurred (for example, when an SD card is
inserted or removed from the device).
Ventilator Inoperative – When a ventilator inoperative •
alarm occurs, a continuous audible indicator sounds.
The alarm descriptions later in this chapter display this
indicator as:
Power Failure – When a power failure occurs, a series of •
beeps sounds in a 1 beep pattern, repeating one second
on, then one second o. The alarm descriptions later in
this chapter display this indicator as: • •
High Priority – When a high priority alarm is active, a •
series of beeps sounds in the following pattern, which is
repeated twice: 3 beeps, a pause, and then 2 more beeps.
This indicator continues until the cause of the alarm is
corrected or the audible alarm is silenced. The alarm
descriptions later in this chapter display this indicator as:
• • • • • • • • • •