User manual

Chapter 2 Device Setup
25
The following items appear on the Information screen:
Monitor Parameters - Displays the available parameters. •
Therapy Hours - Displays the average amount of time •
therapy is received over a 7 day and 30 day period.
Blower Hours - Displays the total number of hours that •
the blower has been on. It can be reset by your home
care provider. This setting allows the provider to track
device usage between patients.
Machine Hours - Displays the total number of hours •
that the blower has been on. This cannot be reset by the
home care provider.
Viewing the Monitor Parameters Screen
There are two ways to access the Monitor Parameters screen:
From the Monitor Pressure screen, press the Alarm •
Silence and Ramp keys simultaneously for two seconds.
From the Information screen, select the Monitor •
Parameters setting.
The parameters displayed in this screen are described in the previous
table. A sample screen is shown below.
cmH
2
O
4.0
6
MinVent
6
Vte
200
RR
10
Press the Wheel to exit the Monitor Parameters screen and return to
the previous screen.
Note: The information
displayed in the last box shown
on the sample screen will vary
depending on what accessory is
attached to the therapy device.
This box will be empty (as shown
here) if no accessory is attached.
Please refer to the instructions
included with your accessory for
more information.
Sample Monitor Parameters
Screen