User manual

Chapter 2 Device Setup
21
9. Verify that the device beeps when therapy is stopped. If the
device does not operate accordingly, contact your home care
provider, as the alarm system may not be fully functional.
Monitor Pressure Screen
From the Main Menu, if you select Therapy and then press the Wheel,
the following Monitor Pressure screen appears.
S/T
20.0 cm H
2
O
RR 15
The Monitor Pressure screen displays the following items:
Pressure •
Therapy Mode (CPAP, S, or S/T) •
Timed Breath Indicator ( ) •
Icon Bar •
Measured Parameters •
The top of the display shows a group of status symbols. The symbols
will only appear if the conditions described in the following table exist.
Symbol Description
The Provider Access symbol indicates the device is in
Provider mode.
FLEX The Flex symbol displays only when the Bi-Flex
therapy feature is enabled by the provider.
The Apnea alarm symbol displays only when the
Apnea alarm is enabled by the provider.
The Patient Disconnect symbol displays only when the
Patient Disconnect alarm is enabled by the provider.
Sample Monitor Pressure
Screen
Note: The Ramp symbol will also
appear on the display if Ramp
is active.
Note: If an accessory is attached
to the therapy device, additional
symbols may appear on the
Monitor Pressure screen. Refer
to the instructions provided
with the accessory for more
information.