User manual

Chapter 2 Device Setup
17
WARNING
This device is activated when the
power cord is connected.
Note: See Chapter 4 for
instructions on using DC Power.
WARNING
Be sure to route the power cord to
the outlet in a way that will prevent
the cord from being tripped over or
interfered with by chairs or other
furniture.
Supplying AC Power to the Device
Complete the following steps to supply AC power to the device:
1. Plug the socket end of the power cord (included) into the power
supply (also included).
2. Plug the pronged end of the power cord into an electrical outlet
that is not controlled by a wall switch.
3. Plug the power supply cord’s connector into the power inlet on
the back of the ventilator.
4. Ensure that all connections are secure.
Important! To remove AC power, disconnect the power supply cord from the
electrical outlet.
Display Symbols
The following symbols may display on the device in place of text if
the display language selected by your home care provider is “Icon.”
Symbol Description
Activate Mode
Alarm
Apnea
Back
Backlight
Flex therapy feature
Blower Hours
BPM
Breaths Per Minute
Comfort Setting