User manual

Chapter 2 Device Setup
15
Installing the Air Filter
The device uses a gray foam lter that is washable and reusable.
The reusable lter screens out normal household dust and pollen.
It must be in place at all times when the device is operating. One
reusable gray foam lter is supplied with your device. If your lter is
not already installed when you receive the device, you must install it
before using the device. To install the gray foam lter, insert it into the
lter area.
Where to Place the Device
Place the device upright on a rm, at surface somewhere within
easy reach of where you will use it, at a level lower than your sleeping
position. Make sure the lter area on the back of the device is not
blocked by bedding, curtains, or other items. Air must ow freely
around the device for the system to work properly. Make sure the
device is away from any heating or cooling equipment (e.g., forced air
vents, radiators, or air conditioners).
CAUTION
A properly installed, undamaged
gray foam lter is required for
proper operation.
CAUTION
Do not place the device directly onto
carpet, fabric, or other ammable
materials.
CAUTION
Do not place the device in or on any
container that can collect or hold
water.
BiPAP S/T
user manual
2. Device Setup