User manual

31
User Manual
6.2.2.4 Ch a n g i n g T h e led ba C k l i g h T se T T i n g
WhenairowisturnedonandthedeviceisintheOperatestate,youcan
turn the control pad lighting behind the buttons on or off using the LED
backlight setting.
NOTE: Thelightsarealwaysonwhentheairowisoffandtheunitis
in Standby.
To change the LED backlight setting, complete the following steps:
1. From either the Monitoring or Standby screens, press the Right User
button until the LED Backlight Setting screen appears, as shown in
Figure 6–11.
Figure 6–11 LED Backlight Setting Screen
2. Press the Heat or Ramp button to select a new setting. A setting of 1
means the light is on, while 0 means the light is off.