User manual

29
User Manual
To change the Flex setting, complete the following steps:
1. From either the Monitoring or Standby screens, press the Right User
button. The Flex Setting screen appears, as shown in Figure 6–8.
Figure 6–8 Flex Setting Screen
2. To increase or decrease the Flex setting, press the Heat or Ramp
button until the correct setting appears. You can choose from 1 to 3.
NOTE: It is recommended that you start with the minimum setting of
1, which provides the least relief. Levels 2 and 3 progressively
increase the pressure relief.
6.2.2.2 Ch a n g i n g T h e ri s e Ti m e se T T i n g
Rise time is the time it takes for the device to change from EPAP to IPAP.
Youcanadjusttherisetimetondthesettingthatprovidesyouwiththe
most comfort.
NOTE: The rise time feature is not prescribed for all users. If the
screen shown in Figure 6–9 does not display, you cannot
adjust this setting.
Additionally, if the Flex feature has been prescribed for you,
whenFlexisenabled,therisetimeisxedatasettingof3.
The Rise Time screen will not display, and you won’t be able
to adjust the setting.