User manual

25
User Manual
c. The third screen to appear is the Blower Hours screen, which
displays the blower hours time meter:
Figure 6–3 Blower Hours Screen
NOTE: WiththeexceptionofthePressure On/Off button, the control
padisinactiveduringtheserstthreescreens.Eachofthese
screensappearsforapproximately1-3seconds.
d. The next screen that appears is the Standby screen, shown in
Figure 6–4. This indicates that the device is in the Standby state.
Figure 6–4 Standby Screen
2. Press the Pressure On/Off button to put the unit into the Operate
state. The Monitoring screen, shown in Figure 6–5, appears.
Figure 6–5 Monitoring Screen
Both the Monitoring and the Standby screens display the Patient
Disconnect, Apnea, and LED backlight icons if these features are
enabled. Additionally, the SmartCard icon displays if a SmartCard is
inserted.
The Monitoring screen also displays the actual measured pressure
and the Flex icon if Flex is enabled.