User manual

24
User Manual
Ch a p T e r 6: op e r a T i n g T h e de v i C e
This chapter explains how to start the device and change the settings.
6.1 sT a r T i n g T h e bipap s/T
1. Plug in the device to an AC or DC power source to power up the
unit.Aconrmationalarmsounds,andthecontrolpadbuttonslight
up.
NOTE: If the alarm does not sound or the buttons do not light up, the
device requires servicing. Contact your home care
provider.
Several screens appear initially during this step:
a. TherstscreenthatappearsistheSelfTestscreen,shownin
Figure 6–1. This is the internal test performed by the device.
Figure 6–1 Self Test Screen
b. The next screen displays the software version, as shown in
Figure 6–2:
Figure 6–2 Software Version Screen
NOTE: Version 1.0 shown in Figure 6–2 is an example. Your device
may have a higher software version installed.