User manual
4 User Manual
System Contents
Your BiPAP autoSV Advanced System One includes the following items:
• Device • Flexible tubing, 22 mm (optional 15 mm tubing is also available)
• User manual • Power cord and power supply (Part# 1058190)
• Carrying case • Side cover panel
• Reusable gray foam lter • SD card
• Disposable ultra-ne lter • Humidier (optional)
Note: If any of these items are missing, contact your home care provider.
System Overview
The BiPAP autoSV Advanced System One device is intended to augment your breathing by supplying pressurized
air through a circuit. It senses the your breathing effort by monitoring airow in the circuit and adjusts its output to
assist in inhalation and exhalation. This therapy is known as Bi-level ventilation. Bi-level ventilation provides a higher
pressure, known as IPAP (Inspiratory Positive Airway Pressure), when you inhale, and a lower pressure, known as
EPAP (Expiratory Positive Airway Pressure), when you exhale. The higher pressure makes it easier for you to inhale,
and the lower pressure makes it easier for you to exhale.
When prescribed, the device can also provide features to help make your therapy more comfortable. The ramp
function allows you to lower the pressure when trying to fall asleep. The air pressure will gradually increase until the
prescription pressure is reached. Additionally, the Bi-Flex comfort feature provides increased pressure relief during
the expiratory phase of breathing.
Several accessories are also available for use with the device. Contact your home care provider to purchase any
accessories not included with your system.
Air Outlet Port
Power Inlet
Filter Area
SD Card (Accessory) Slot
Side Cover
T a b
SD Card Cover
This gure illustrates some of the device features, described in the following table.
De v i c e fe a t u r e De S c r i p t i o n
Air Outlet Port (conical, 22 mm) Connect the exible tubing here.
SD Card (Accessory) Slot If applicable, insert the optional accessory SD card here.
SD Card Cover If applicable, the optional accessories such as a Link Module or Modem can be installed
here. Refer to the instructions supplied with the accessory. When not using an accessory,
this cover must be in place on the device.
Power Inlet Connect the power cord here.
Filter Area A reusable, gray foam lter must be placed in the lter area to screen out normal household
dust and pollens. A white ultra-ne lter can also be used for more complete ltration of
very ne particles.
Side Cover If using a humidier with the device, this side cover can be easily removed with the release
tab before attaching the humidier. Refer to the humidier manual. When not using a
humidier, this cover must be in place on the device.