User manual

User Manual
21
3. You can exit this screen by pressing the Left or Right User buttons or the SILENCE button.
For additional information on using a humidifier with the device, see Chapter 10.
4. To turn the humidifier ON/OFF, press the HEAT button until the device beeps twice and the text
HEAT appears/disappears.
6.2.2 navigating the user disPlay sCreens
You can navigate the rest of the user display screens by pressing the Left and Right User keys.
You can change the settings on any of the display screens by pressing the HEAT and RAMP buttons to
increase or decrease the setting.
You can exit any of the user display screens by pressing the SILENCE button.
Figure 6–7 shows how to navigate the user display screens using the right and left user buttons.
Right User
Button
Right User
Button
Left User
Button
Left User
Button
Only displayed if the rise time feature
is prescribed.
Only displayed if the ramp feature
is prescribed.
Rise Time Setting Screen
Ramp Start Pressure Setting Screen
LED Backlight Setting Screen
RISE TIME
RAMP
START
cm
H
2
O
LIGHT
Figure 6–7 Navigating the User Display Screens
6.2.2.1 Changing the rise time setting
Rise time is the time it takes for the device to change from EPAP to IPAP. You can adjust the rise time to
find the setting that provides you with the most comfort.
NOTE: If the screen shown in Figure 6–8 does not display, you cannot adjust this setting.
To change the rise time setting, complete the following steps: