User manual

User Manual
11
e information shown on the display screen is defined as follows:
ALARM
Indicates that the device requires user attention as indicated on the screen.
APNEA
Indicates that an apnea alarm has occurred.
BPM
Indicates that a breath rate setting is being displayed. is symbol flashes when the device
is providing timed backup breaths.
CARD
Indicates that a SmartCard is inserted and detected.
cm H
2
O
Indicates that the alphanumeric digits are displaying a pressure value.
EPAP
Indicates that an EPAP pressure setting is being displayed.
HEAT
Indicates that the humidifier is turned on and/or its setting is displayed.
LEAK
Indicates that the Estimated Leak Rate is being displayed.
LPM
Indicates that the value displayed is in liters per minute.
MinVent
Indicates that the Estimated Minute Ventilation is being displayed.
ml
Indicates that the value displayed is in milliliters.
HOURS
Indicates that the erapy Hour Meter is being displayed.
T
i
Indicates that an inspiratory time setting is being displayed.
IPAP
Max
Indicates that an IPAP maximum pressure setting is being displayed.
IPAP
Min
Indicates that an IPAP minimum pressure setting is being displayed.
LIGHT
Indicates that the control pad LED backlight setting is being displayed or is active.
PATIENT
Indicates that a Patient Disconnect alarm is active.
RAMP
Indicates that the Ramp function is in progress.
RAMP
START
Indicates that the Ramp Starting Pressure is being displayed.
RISE TIME
Indicates that a rise time setting is being displayed.
RR
Indicates that the Respiratory Rate (RR) is being displayed.
s
e small “s” on the right side of the display (above “cm H
2
O”) indicates that the
alphanumeric digits are displaying a time value, in seconds.
V
TE
Indicates that the Estimated Exhaled Tidal Volume is being displayed.