User manual

12
User Manual
 e information shown on the display screen is defi ned as follows:
ALARM
Indicates that the device requires user attention as indicated on the screen.
APNEA
Indicates that an apnea alarm has occurred.
BPM
Indicates that a breath rate setting is being displayed.  is symbol fl ashes when the device
is providing timed backup breaths.
CARD
Indicates that a SmartCard is inserted and detected.
cm H
2
O
Indicates that the alphanumeric digits are displaying a pressure value.
EPAP
Max
Indicates that a maximum EPAP pressure setting is being displayed.
EPAP
Min
Indicates that a minimum EPAP pressure setting is being displayed.
FLEX
Indicates that Bi-Flex is turned on and/or its setting is displayed.
HEAT
Indicates that the humidifi er is turned on and/or its setting is displayed.
HOURS
Indicates that the  erapy Hour Meter is being displayed.
LEAK
Indicates that the Estimated Leak Rate is being displayed.
LIGHT
Indicates that the control pad LED backlight setting is being displayed or is active.
LPM
Indicates that the value displayed is in liters per minute.
MinVent
Indicates that the Estimated Minute Ventilation is being displayed.
ml
Indicates that the value displayed is in milliliters.
PATIENT
Indicates that a Patient Disconnect alarm is active.
Max
PRES
Indicates that the maximum Pressure setting is being displayed.
PS
Max
Indicates that the maximum Pressure Support setting is being displayed.
PS
Min
Indicates that the minimum Pressure Support setting is being displayed.
RAMP
Indicates that the Ramp function is in progress.
RAMP
START
Indicates that the Ramp Starting Pressure is being displayed.
RR
Indicates that the Respiratory Rate (RR) is being displayed.
RISE TIME
Indicates that a rise time setting is being displayed.
s
 e small “s” on the right side of the display (above “cm H
2
O”) indicates that the
alphanumeric digits are displaying a time value, in seconds.
V
TE
Indicates that the Estimated Exhaled Tidal Volume is being displayed.