6 Phase Electronic Air Purifier Operation Manual Model No. RespirAide200T 228256 R C US To reduce the risk of electric shock, this equipment has a grounding type plug that has a third (grounding) pin.This plug will only fit into a grounding type power outlet.If the plug does not fit into the outlet, contact a qualified personnel to install the proper outlet.Do not alter the plug in any way.
BEFORE OPERATING AIR PURIFIER, READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY. CONTENTS FOR CUSTOMER ASSISTANCE .................................... E-4 CONSUMER LIMITED WARRANTY................................ E-5 HOW IT WORKS ............................................................. E-6 FEATURES AND SPECIFICATIONS .............................. E-7 FEATURES ...................................................................... E-7 SPECIFICATIONS ........................................................
FOR CUSTOMER ASSISTANCE If you have questions about your air purifier, call customer service number.Before calling, please note the model and serial number located on the back of the unit and fill in the following information below.This information will help us answer your questions much more quickly.
CONSUMER LIMITED WARRANTY RespirAide AIR PURIFIER LIMITED WARRANTY Congratulations on your investment RespirAide Tech Inc.(hereinafter called RTI) gives you the following limited warranty for this product only if it was originally purchased from RTI or from an Authorized RTI Dealer. RTI warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.If any such defects should be found in this product within the applicable warranty period.
HOW IT WORKS The air purifier functions as an air cleaner by helping to disinfect airborne microorganisms and removing particulates from the air . The centrifugal fans of the unit draw air through the front panel (Intake) on the front of the unit.Then it passes through the Microbiologic filter, the Electrostatic precipitator, the Activated Carbon Filter and the UV-Photo catalytic sterilization chamber.The purified air is then realeased through the outlet on the top of the unit.
FEATURES AND SPECIFICATIONS FEATURES Multi-Stage Filters The unit utilizes a two stage electrostatic precipitator combined with a Microbiologic Pre-filter (for large particles), an Activated Carbon Filter (for odors and gases), UV germicidal light (killing airborne pathogen), a Photo catalytic filter (removes VOC's) and a Negative ion generator. Automatic Function The gas sensor(odor sensor) can let the unit automatically select the appropriate fan speed depending on the air quality detected.
IMPORTANT SAFETY PRECAUTIONS When using electrical appliances,basic safety precaustions should always be followed, including the following: WARNING -To reduce the risk of electrical shock, fire or injury to persons: Use only as described in this manual. Use only a 120-volt outlet with a polarized receptacle. The air purifier has a polarized plug (one blade is wider than the other is),this plug will fit in a polarized outlet only one way.Initially, if the plug does not fit into the outlet, reverse it.
IMPORTANT SAFETY PRECAUTIONS This manual classifies precautions into WARNINGS and CAUTIONS.Be sure to to follow all precautions below:They are important for ensuring your safety. WARNING If you do not follow these instructions exactly,the unit may cause property damage,personal injury or loss of life. CAUTION If you do not follow these instructions exactly,the unit may cause minor property damage or personal injury. 120V Do not do anything that could damage the electrical power cord.
IMPORTANT SAFETY PRECAUTIONS 125V 2A Copper Wire Do not operate the unit or touch the plug with wet hands.It may cause electric shock. Use a fuse with proper capacity.Never use a wire in place of a fuse.Doing this may lead to malfunction or fire. 40 C 5C Relative humidity<80% If any parts of the power source get wet remove the plug and dry it completely before reusing. Use the product in the ambient temperature of 0-40 C . Do not place the product in direct contact with sunlight.
IMPORTANT SAFETY PRECAUTIONS Do not disassemble or modify this equipment. Unwarranted tampering can lead to fire ,electric shock and/or unit malfunction. Prevent combustibles from being drawn into the unit.Combustible substances can cause fire. Make sure to prevent water from coming into the product.It can lead to malfunction or electric shock. Be careful not to tip over the unit when opening the front panel.If not,It may cause personal injury.
PART NAMES AND DESCRIPTION 1.5 1 1.4 2 FILTER CHECK UV LAMP 1.3 R www.respiraide.com 3 4 4h TIMER 2h 1h H SPEED M L AUTO 1.2 POWER ION R Model No.200T 1.1 5 19 6 16 7 18 17 15 8 9 10 Bottom of the Unit 11 20 23.7 13 12 14 24 23.6 21 23.5 23.4 23.3 22 23.1 23 23.2 25 POWER E-12 SPEED AUTO TIMER NEG.
PART NAMES AND DESCRIPTION NAMES OF PARTS 1.Top Plastic Cover (Outlet) 1.1 Remote Control Receiver 1.2 Control Panel 1.3 Gas Sensor 1.4 Display Circuit Board 1.5 Outlet Metal Mesh 2.Fan Blades and Fan Blower 3.Fan Motor 4.Unit Handle 5.UV Light Stainless Steel Reflactor 6.Photo catalyst 7.Electrostatic Discharge Switch 8.Front Panel (Intake) Hook 9.Caster 10.Unit Contact Board 11.Fuse and Fuse Holder 12.High Voltage Generator (Power Supply) 13.Unit Terminals 14.Main Circuit Board 15.
UNIT DISPLAY Activated Carbon Filter Replacement Indicator Light FILTER CHECK Check Indicator Light UV LAMP Gas Sensor(Odor Sensor) R UV Lamp Replacement Indicator Light www.respiraide.com 4h 2h Timer Button and OFF Timer Display Indicator Lights TIMER 1h H M Fan Speed Button and Indicator Lights SPEED L Auto Operation Indicator Light AUTO POWER ON/OFF Button ION Negative Ion Indicator Light Model No.
BEFORE OPERATION Remote Control Setup Preparing the remote control The battery is already set in the remote control,pull out the clear sheet from the battery cover before using. How to use the remote control a)Point the transmitter of the remote control towards the receiver of the main unit.If an obstruction to the signal exists,the remote control will not operate. b)The distance from which the remote control can transmit is approximately 19 feet(6m). www.respiraide.
OPERATION Main Unit Operation 1 FILTER CHECK Connect the Power When the power plug is inserted into the wall outlet all the indicators on the display panel will light up for 2 seconds. UV LAMP R www.respiraide.com 4h 2h TIMER 1h 2 H M SPEED Operating the Unit Press the POWER(ON/OFF) button to start operating the unit.Pressing the Button again will stop operation. NOTE: When the power is connected, the "CHECK" indicator light will turn green and when the unit starts to run,it will go out.
OPERATION FILTER Indicator Light When the"FILTER " light flashes red,the carbon filter needs to be replaced. Indicator Lights UV LAMP Indicator Light When the"UV LAMP" light flashes red, it tells the time for UV lamp to be replaced. FILTER CHECK Indicator Light Once the "CHECK" indicator light flashes red,a checkup is required. CHECK UV LAMP R www.respiraide.com 4h 2h TIMER 1h Sensor Sensitivity The unit's sensitivity to odors can be adjusted.
OPERATION Operation available with the Remote Control: .AIR FLOW .OFF TIMER .AUTO Remote Control Operation Transmitter POWER(ON/OFF) Button The unit will start operating when the POWER Button is pressed.Pressing the button again will stop operation. AUTO Button At AUTO mode,the fan speed is automatically switched (H,M,L) depending on the amount of pollution in the air. SPEED Button The fan speed can be switched among Low, Medium and High settings.
CARE AND MAINTENANCE WARNING To reduce risk of electric shock always unplug before maintenance. To maintain optimum performance of this air purifier, please clean the unit including the filters periodically. When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. Main Unit To prevent dirt or stains on the main unit, clean as often as necessary.
CARE AND MAINTENANCE Cleaning the Electronic Cell Remove the electronic cell a)Stop the operation and unplug the power plug from the electrical outlet. b)Open the front panel. c)Remove the electronic cell. How to clean the electronic cell a)Use a large enough container,such as a laundry tub or trash container. NOTE: Sharp corners on the cells can scratch the surface of a bathtub. b)Dissolve about 3/4 cup of automatic dishwasher detergent per cell in enough hot water to cover the cells.
CARE AND MAINTENANCE Replacing the Activated Carbon Filter Replace the Activated Carbon Filter when the"FILTER" indicator light flashes in red. 1)Stop the operation and unplug the cord from the electrical outlet. 2)Open the front panel. 3)Remove the Activated Carbon Filter. Photo catalytic Filter and UV Germicidal Lamp 1.Photo catalytic filter is permanent, never needs replacing. When there is dust on it, clean the dust off using a vacuum cleaner dusting brush. Do not wash it in water. 2.
TROUBLESHOOTING The system does not operate at all When functions do not work Automatic function does not work properly When other problems in terms of functions are found Power failure? Check other electrical appliances. Power plug disconnected? Make sure to insert the plug. The FUSE out of order? Replace the FUSE with new one. Front panel open? The unit does not operate when the front panel is detached.Install properly. Is the CHECK light flashing? If so, call the Customer Service.
B A D C F E Black Black Red Y. Green Green Negative ion generator E-23 White UV lamp and ballast Fan motor White Pink white Speaker High voltage generator Red Ver.2.0 Red Yellow green Electrostatic discharge switch Yellow Green Ionizer Collector Electronic cell JZ11 Red H JZ8 M C White White L Yellow Black Blue JZ18 JZ10 JZ17 Ｍｏｄｅｌ Ｎｏ．ＲｅｓｐｉｒＡｉｄｅ２００Ｔ JZ1 Black (-) Red (+) Green Green JZ15 JZ16 JZ6 White Black Gas sensor Fuse 120V/60Hz RespirAide Tech Inc.
RespirAide Tech Inc. Add:13-100 Hanlan Road Woodbridge, Ontario Canada L4L 4V8 Tel: 1-866-874-2532 Fax: 1-905-850-5553 www.respiraide.com RespirAide reserves the right to revise or modify products and/or specifications without notice.The contents of this manual are subject to change without notice. R 0612-1-500 Rev.
