Service manual

English
E-11
E-14
IMPORTANT SAFETY PRECAUTIONS
Make sure to prevent water from coming into the
product. It can lead to malfunction or electric
shock.
Prevent combustibles from being drawn into
the unit. Combustible substances can cause fire.
Do not disassemble or modify this equipment.
Unwarranted tampering can lead to fire, electric
shock and/or unit malfunction.
Do not use the unit in humid places which
might be wet. Contact with water can lead to
electric shock or damage the equipment.
UNIT Control Panel
After cleaning the filters, make sure to dry the cell
thoroughly before reinstalling. If not, it can cause
breakdown of the unit or personal injury.
Be careful not to tip over the unit when opening
the front panel or moving it. If not, It may cause
personal injury.
Power
Speed Timer Swing Auto
hr
Check Unit
Negtive Ion
Timer
Swing
Night
L
M
H
L-R
Filter Life
UV Lamps
Speed
Auto
Gas Level
Dust Level
Power
Speed Timer Swing Auto
Air Pollutant Indicator
Light
Monitors and displays the
indoor air contamination
level.
Auto Indicator Light
At Auto mode, the fan
speed is automatically
switched (H,M,H)
depending on the amount
of pollutant in the air.
Swing Indicator Light
Shows the louver swings
horizontally.
UV Lamp Indicator
Light
When UV lamp
indicator light flashes,
it tells the time for UV
lamp to be replaced.
Night Indicator
Light
When it is on, all
indicator lights on
the display panel
will be off.
Speed Indictator Light
Shows the fan speed from
Low to Medium and then
High.
Timer Indicator Light
Shows the time for operation.
Filter Indicator Light
When Filter life indicator
light flashes, the carbon
filter needs to be replaced.
Negative Ion Indicator Light
When the indicator is on,negative
ions are discharged.
Check Indicator Light
Once the Check indicator
light flashes red, a checkup
is required.
Unit Indicator Lights
Unit Buttons
Power(ON/OFF) Button
Speed Button-
Select the fan speed
you desired
Swing Button-
Control the air outlet
louver
Timer Button-
Select the time for operation
Auto Button-
Set the unit at Auto mode