operation manual

appliance.
•
The current temperature
setting is too warm
•
Warm or hot food inside the
appliance.
• The appliance is overfilled.
•
The door seals are damaged
Strong
formation
of encrusted ice.
• The door is not correctly
closed.
•
The door seal is damaged or
soiled.
• Shut the door.
•
Clean the door seal
with a soft cloth and
warm soapy water.
•
Replace the door seal.
The door makes
a strange sound
when opened.
• The door seals are soiled.
• Clean the seals with
warm water and a
mild, non-acrid
detergent.
The internal
light
11
does not
work.
•
The light is damaged.
• .
•
Replace the
illuminant..
Check the water drain and the water drain hole regularly. Otherwise water
will spread into your appliance or run out of the appliance.
• If the appliance shows a malfunction not noted on the schedule above or if
you have checked all items on the above schedule but the problem still exists,
please contact a service department.
The operating procedures described below are normal
and do not indicate a malfunction.
• The refrigerant generates a sound similar to flowing water.
• Sometimes you may hear a sound which is generated by the injection process
of the cooling circuit.
• Some humidity may accumulate outside the appliance, especially in a moist
surrounding. Simply wipe this humidity away.
• The sides of the appliance may get warm while the appliance is running.
Distinct noise
When you run the appliance for the first time or the
cooling temperature falls below a certain level it will
operate with high power to reach the preset
11
Depending on model
52