Instructions
Table Of Contents
en-49
WARNING: Connection of the power cable must comply with the instructions given in the
table below.
Conductor cross section (mm²)
Connection mode
L1 L2 L3 N E
1N~ (single-phase) Min 6 - - Min 6 Min 6
2N~ (two-phase) Min 2.5 Min 2.5 - Min 6 Min 6
3N~ (three-phase) Min 2.5 Min 1.5 Min 1.5 Min 6 Min 6
Fit a suitable plug corresponding to the load shown on the appliance nameplate.
Connecting the hob to the oven
1)
2)
Fig. 5.11
1) - Power cable
2) - Hob control knobs connecting cable