Installation guide

Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Revision 2.7 Page 53 of 83
Mercury Plant Controller Installation Guide
Plant Controller home page
Log in using an appropriate username and password; setup operations can then be used via the PC by clicking on
the appropriate link: -
Link
Operation
Values
Shows the values being return on the controllers inputs and outputs
Settings
Shows the controllers parameter settings
Alarm Log
Shows the controllers alarm history; up to 1000 alarms are stored
Graph
Shows the controller values in graphical format
Set Parameters
Allows the user to change parameter values; see Set Parameters
System Log
Shows the changes made to the controller in chronological order
Network
Allows the user to setup: -
IP Address
Netmask
Gateway
Time
Allows the user to set the Time or synchronise with the PC
Reset
Allows the user to reset the controller
Configuration
Allows the user to change the controller configuration; see changing configuration
Export Log
Creates a log file of the controllers data for downloading onto a PC
Save Pack Setup
Saves the current Configuration
Load pack Setup
Allows the user to upload a pre-configuration (a stand-alone PC program is available to
create Plant controller configuration files. Contact RDM for details
Clear Alarm Log
Clears the controller alarm log completely (Yes/No choice)
Version
Shows the controllers software version