User guide

Revision 7.1b Page 8 of 31
Mercury Coldroom Panel Installation Guide
www.resourcedm.com
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Internal Cable Diagram for LLV type
Internal Cable Diagram for EEV type
The above cable is used internally to bring the Door Switch and Man-trap inputs to the main processing board. This cable must not be
removed or changed in any way,
RS485 Network Connection.
If the panel has been specified with RS485 communications then an RS485 communications card will be fitted in place of an IP card,
connections are as shown, colours are for Belden 8723 cable.
RED
BLACK
BLUE
RED
BLACK
BLUE