User guide

Revision 7.1b Page 31 of 31
Mercury Coldroom Panel Installation Guide
www.resourcedm.com
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Revision History
Revision
Date
Changes
Comments
1.0
03/08/2007
1
st
Issue
1.1
10/08/2007
Typo’s corrected
6.2
07/07/2008
Revision number in revision history now reflects that of the controller software
version, option to disable buzzer operation, additional text added for onboard
digital inputs, man trap alarm forces lights on, table with part numbers added,
table added highlighting available digital inputs, ability to initiate a defrost from
an external defrost input added, response on/off changed to EEV prop gain,
integ gain and integ time, parameter for remote suction select added, MOP
support added (see P-30), IO tables updated for E & M to include new features,
additional remote commands added.
6.3
31/10/2008
Internal Cable for alarm inputs added
6.3a
21/05/2009
Typo’s corrected
6.3b
22/06/2009
Updated digital input descriptions.
6.3c
26/03/2010
Revised relay ratings guide introduced.
6.3d
14/04/2010
EEV Control information updated.
6.3e
15/12/2011
Descriptions changed
6.3f
15/06/2012
New look, RS485 connections added
6.3g
02/07/2012
IP Rating added
New Processor
6.3h
21/11/2012
Cable gland instruction added.
7.0
17/05/2013
Update of new features, Fan control, Load Shedding
7.1
19/09/2013
Added Feature – Pin restrictions on accessing menus on controller display
7.1a
10/03/2014
P-30 Description corrected, changed from evap. select to broadcast ID
7.1b
02/04/2014
P-19 removed, lits spelling corrected to ligt.