User guide

Revision 7.1b Page 27 of 31
Mercury Coldroom Panel Installation Guide
www.resourcedm.com
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Display Remote Mounting
The display section of the Coldroom Panel can be removed for remote fixing. Unscrew the two front panel screws; take of the display
front and then remove the 4 screws housing the display back onto the main enclosure. The display has a 5 meter cable which requires to
be uncoiled from its internal location. Ensure that all power is disconnected before this operation.
Mount the display back onto the surface using the centres below and then assemble the display front, securing with the 2 front panel
screws.
Display dimensions and fixing
Dimensions are in mm