User guide

1514
ReSound Vea supplement— Custom ItC and ItE
until the outer ring lies flush with the outside of your
hearing instrument.
4. Pull the tool straight out—the new wax guard will
remain in place.
The HF3 wax protection system
To remove a used wax filter:
1. Insert the threaded end of the HF3 tool into the
wax filter on the hearing instrument and then twist
the tool approximately one and a half turns. (See
illustration on the next page.)
2. Pull the HF3 tool out and away from the hearing
instrument. The wax filter should pull out with the
tool. If not, repeat Step #1, with an additional twist
of the tool.
To dispose of a used wax filter:
Before changing the filter or guard, clean any visible
wax from the shell of your hearing instrument with a
soft cloth.
The CeruSTOP™ wax protection system
To remove an old wax guard:
1. Insert the removal side of the wax guard tool into
the used wax guard so that the shaft of the tool is
touching the rim of the wax guard.
2. Slowly pull the wax guard tool straight out. Do not
twist the wax guard from the bushing.
To insert a new wax guard:
3. Gently press the replacement side of the wax
guard tool straight into the hole of the sound outlet
Removal side
Replacement side
WAX GUARD TOOL
1
Old wax guard
2
New wax guard
3
4
1a
2
1b