User Manual

10
Before You Begin:
Ensure your Nucleus 6 Sound
Processor has a fresh or recharged
battery, and hearing aid has a
new battery. You may experience
connectivity issues if battery
power is low.
1
Plug power cable into TV
Streamer, and plug into
wall outlet.
2
Turn off ReSound Hearing Aid
and Nucleus 6 Sound Processor.
3
Press pairing button on
TV Streamer. Press number of
times (1, 2, or 3) for channel allocation.
NOTE: The LED will flash
yellow indicating that
pairing mode has been
activated. The number of
flashes indicates the channel
selection. Pairing mode is
active for 20 seconds.
Pushes
Light Indicator
Pattern
Channel
1
1
2
2
3 3
4
Turn on ReSound Hearing
Aid. The hearing aid pairing
is successful when the yellow
flashing light on the TV Streamer
turns solid.
5
The yellow light will go
back to flashing when ready
for the Nucleus 6 Sound
Processor pairing.
6
Turn on Nucleus 6 Sound
Processor by connecting the
battery and confirm successful
pairing. The Nucleus 6 Sound
Processor pairing is successful
when the light on the Nucleus 6
Sound Processor flashes blue.
NOTE: The blue indicator
light may not show on the
sound processor for an
N22 patient.
TV Streamer Pairing