Installation Guide

LongLife Door/Window Sensor is a transmitter with a

ten year battery life. Typically used to sense opening and

closings of doors and windows, it will alarm when the

magnet is pulled away from the sensor.

Features

• Industry-leading wireless range

• 10 year battery life

• Quick peel and press mounting

• Secure encrypted wireless transmissions

Enroll by placing the panel into wireless enrollment mode

and then sending an enrollment signal from the sensor.

Alternatively, the sensor can be enrolled by entering

its 8-character serial number on the interactive service

provider’s web portal.

Options for sending an Enrollment Signal

• Remove the battery tab, which can be done

without removing the cover, OR

• Remove the cover to trip tamper

Install by removing the adhesive paper and adhering the

sensor and magnet on a door or window. Make sure to

align the alignment marks on the sensor and magnet

when mounting.

High Bond Tape works great if the surface is properly

prepared and rm pressure is applied for over 10

seconds.

Surface Preparation

• Clean the surface

• Ensure the mounting surface temperature is

above 50°F

Use the panel installation guide to verify proper system setup.

LongLife Door/Window Sensor

Connect+

™

Encrypted (DWS-LL)

PAGE 1
ten year battery life. Typically used to sense opening and closings of doors and windows, it will alarm when the magnet is pulled away from the sensor. Features • • • • Industry-leading wireless range 10 year battery life Quick peel and press mounting Secure encrypted wireless transmissions Enroll by placing the panel into wireless enrollment mode and then sending an enrollment signal from the sensor.
PAGE 2
Specifications Physical Housing Dimensions Weight with Battery Mounting Fastener 2.90 x 1.04 x 0.39 inches (7.4 x 2.6 x 1.0 cm) 0.79 ounces (22.5 grams) High Bond Tape Environmental Operating Temperature Maximum Humidity 32 to 120°F (0 to 49°C) 85% non-condensing relative humidity Sensor Specifications Frequency Replacement Battery Nominal Battery Life Battery Voltage Current Draw Transmitted Indications 433.92 MHz One Panasonic CR2032 10 years 3.0 VDC (Nominal) 20 mA (Maximum), 0.