Installation Instructions

6
Doorbell Installation
Recommended Installation Height: 1.2m (4ft) above the ground.
1
Shut off the electricity at the breaker that controls doorbell's Shut off the electricity at the breaker that controls doorbell's
circuit.circuit.
2
(Optional)(Optional) When the wall is uneven, paste the plate foam to When the wall is uneven, paste the plate foam to
the mounting plate.the mounting plate.
3
Using your mounting plate as a template, mark the location Using your mounting plate as a template, mark the location
of the two mounting holes on your wall, and insert anchors, of the two mounting holes on your wall, and insert anchors,
then fix the mounting plate to the wall.then fix the mounting plate to the wall.
AnchorMounting Screw
Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).