Instructions / Assembly

4/4
STEP 3: First, attach the Back Panel (B) to end
of Armrests ( D) using 3.2” Screws (I).
Then, attach one side of the Folding Brackets (F)
to end of Back ( B) using 2” Screws (H).
Next, attach the other end Folding Brackets (F) to
the back legs of the Seat (A) using 2” Bolt (K).
Secure with Washer (M) and Nut (L).
Important: Do not over tighten the bolts
STEP 4: Attach Back seat beam(E) to rear leg
using Screw 2"(H) as per diagram.
Furniture care
For assistance with anything, please contact customer service
1-949-316-0010 or Email: [e-mail]
Style designed and created in California, USA
STEP 5: ** ATTENTION** LOCK the Chair
BEFORE sit on it.
LOCK the Chair by inserting the Metal Plug
(pre-attached to the right leg) through the pre-
drilled hole in the right leg(C) to the seat (A) to
lock the chair in place for safe seating.
TIPs: Please pull out the Metal PLUG when
you want to fold up the chair.
Important:
Do not over tighten the bolts