User Guide
MOUNTING INSTRUCTIONS
1. Choose a location on the furnace cabinet where the
lighting instructions will be readily visible when the
pilot is being lit.
2. Remove the paper backing.
3. Line up the top edge of the sticker so it looks
straight and press down the edge. Roll the sticker
down from the top, smoothing it with your hand and
removing air bubbles as you go.
4. Rub your hand gently over the entire sticker to make
sureitisrmlyattachedtothefurnacecabinet.
5. Discard the paper backing.
69-0373-02
w ww.resideo.com
© 2020 Resideo Technologies, Inc. All rights reserved.
This product is manufactured by Resideo Technologies, Inc. and its affiliates.
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
69-0373—02 M.S. Rev. 05-20 | Printed in United States