Submittal Sheet

ManualsBrandsResideo ManualsPlumbing Supplies3/4" FK06 Replacement Filter Insert, 50 Microns

Table Of Contents

FK06 DialSet®

LOW LEAD PRESSURE REGULATING FILTER COMBINATION

SUBMITTAL SHEET

Job Name

Engineer

Mechanical Contractor

Contractor’s P.O. No.

Representative

Notes

Model(s)

Qty.

Notes

Qty.

Notes

Qty

Notes

Approval

Service

Tag No.

APPLICATION

The Honeywell FK06 DialSet Pressure Regulating

Filter Combination is a high-quality pressure

regulating valve and rinsable filter that maintains a

constant outlet pressure over a wide range of inlet

supply pressures and ensures a continuous supply

of filtered water. It is suitable for potable water and

irrigation applications. The downstream pressure

adjustment dial eliminates the need for a pressure

gauge when adjusting the pressure setting (static

pressure only).

SPE

CIFICATIONS

Model: FK06 DialSet Pressure Regulating Filter Combination

Regulator Mechanism: Fabric-reinforced diaphragm.

Filter Mechanism: Stainless steel 50 micron rinsable filter insert.

Seat Design: Balanced single seat construction.

Inlet Pressure (Maximum): 250 psi maximum.

Reduced Pressure Range: 25 to 90 psi (1/2 in. to 2 in.).

Outlet Pressure: Factory set at 60 psi (414 kPa).

Dial Calibration: ± 4 psi.

Differential: 14.5 psi minimum (inlet to outlet).

Fluid Temperature (Maximum):

Water: 104° F (40° C).

Ambient Temperature Range: 33° F to 140° F (1° C to 60° C).

Pipe Sizes Available:

3/4 in., 1 in., 1-1/4 in. available.

Connections: Can be configured as female thread-by-thread, double-union, NPT

threaded or sweat.

Low Lead Content: < 0.25% Lead.

Gauge Tap: 1/4” NPT.

Approvals:

ASSE 1003 Listed

CSA Certified

NSF 61 Compliant

MATERIALS

Body: Brass

Internal Parts: Stainless steel and engineered plastics

Regulator Mechanism: Fabric-reinforced diaphragm

*Lead Free Plumbing Code Compliance: The wettable surfaces of lead free models

contain less than 0.25% of lead by weighted average.

DIMENSIONS

Model Number

Pipe Size

Dimensions, Approximate

Inch

Inch (H x L)

mm (H x L)

Double-Union Sweat

FK06

-101-DUS-LF 3/4" 9-3/4” x 5-13/64” 247 x 132

FK06

-102-DUS-LF 1" 11-9/16” x 6-17/32” 293 x 166

FK06

-103-DUS-LF 1-1/4" 11-9/16” x 7-1/8” 293 x 181

Double-Union Threaded

FK06

-101-DUT-LF 3/4" 9-3/4” x 5-13/64” 247 x 132

FK06

-102-DUT-LF 1" 11-9/16” x 6-1/16” 293 x 154

FK06

-103-DUT-LF 1-1/4" 11-9/16” x 6-47/64” 293 x 171

Summary of content (2 pages)

PAGE 1
FK06 DialSet® LOW LEAD PRESSURE REGULATING FILTER COMBINATION SUBMITTAL SHEET Job Name Engineer Mechanical Contractor Contractor’s P.O. No. Representative Notes APPLICATION The Honeywell FK06 DialSet Pressure Regulating Filter Combination is a high-quality pressure regulating valve and rinsable filter that maintains a constant outlet pressure over a wide range of inlet supply pressures and ensures a continuous supply of filtered water. It is suitable for potable water and irrigation applications.
PAGE 2
FK06 DIALSET WATER CAPACITIES The suitability of a given regulator size is dependent on the pressure requirements where it will operate. For the pressure regulator valve size required for a specific installation, determine the following: 1. Pressure differential between inlet and outlet pressure in pounds per square inch (psi), 2. Capacity in gallons per minute, and 3. Allowable reduced pressure falloff in psi.