Replacement Parts List

D06G PRESSURE REGULATING VALVE
62-3053
2
SPECIFICATIONS
Model:
D06G Pressure Regulating Valve.
Construction Materials:
Body: Bronze.
Internal Parts: Stainless steel, NBR, and engineered plastics.
Regulator Mechanism: Fabric reinforced diaphragm.
Thermal Bypass Relief:
Integral thermal bypass relief mechanism on all models.
Seat Design:
Balanced single seat.
Inlet Pressure (Maximum):
400 psi.
Reduced Pressure Range:
15 to 130 psi (all models).
Outlet Pressure:
Factory set at 60 psi.
Differential:
14 psi minimum (for optimum regulation).
Reduced Ratio:
10:1 maximum.
Temperature (Maximum):
180°F (82°C).
Ambient Temperature Range:
33°F to 140°F (1°C to 60°C).
Pipe Sizes Available:
1-1/2 and 2 in.
Connections:
All models have internal NPT on inlet and outlet and
external union connection on inlet and outlet.
One union kit is supplied.
Strainer Screen Size:
0.040 in. (1.0 mm), equivalent to 18 mesh.
Gauge Taps:
1/4 in. NPT (two, one on each side of body).
Weight (With One Union):
1-1/2 in. is 7.7 lb (3.5 kg).
2 in. is 8.5 lb (3.9 kg).
Approvals:
ASSE 1003.
City of LA.
CSA.
IAPMO.
Dimensions:
See Fig. 1.
Fig. 1. D06G installation dimensions in in. (mm).
Water Capacities (See Table 1)
The suitability of a given regulator size is dependent on the
pressure requirements of each installation. To determine the
pressure regulator valve size required for a specific
installation, calculate the following:
1 Pressure differential between inlet and outlet pressure
in pounds per square inch (psi).
2 Capacity in gallons per minute (gpm), and
3 Allowable reduced pressure falloff in psi.
Given these variables, use Table 1 to determine the proper
size pressure regulator valve for your application.
Example: An installation has 135 psi inlet pressure, 60 psi
outlet pressure (75 psi pressure differential). If
30 gpm capacity is required with only 10 psi
falloff allowable, a 1-1/2 in. D06G is required.
This pressure regulator valve allows a flow
capacity up to 46 gpm with a 10 psi falloff at a
no flow pressure differential of 75 psi.
3.82
(97)
H
h
I
L1
L2
DIMENSIONS IN IN. (MM)
H
hI
L1
L2 L1
L2
THREADED
SWEAT
SIZE
1-1/2
2
M11203
11-13/16
(299)
5
(126)
6-3/8
(163)
7-13/16
(198)
9-3/16
(234)
7-7/8
(201)
9-3/8
(239)
11-13/16
(299)
5
(126)
6-3/8
(163)
7-7/8
(200)
9-5/16
(237)
8-5/16
(211)
10-3/16
(259)