Installation Guide

DCN: 140-02338-01 DRAFT 20619
Page 15
Setting the Fan Mode
Thermostat Menu Mode
The Thermostat has a menu of setup and information displays.
To change to the Menu Mode, press and hold the FAN button for 5 seconds.
The display will change to the Menu Mode and display the Setup screen.
Use the Up/Down arrow buttons to scroll through other menu items.
Thermostat Main Screen
Press the FAN button to change the Fan mode
Fan Modes:
 Auto: Fan automatically operated by the HVAC system. (normal setting)
 On: Manual Fan mode. Fan stays on until mode is changed back to Auto,
independent of the heating or cooling system operation.
Press and hold the
FAN button for 5
seconds to go to
the Menu Mode
screen