User's Manual

Thermostat Menu Mode

The Thermostat has a menu of setup and information displays.

To change to the Menu Mode, press the Mode button

The display will change to the Menu Mode and display the Setup screen.

Use the Up/Down arrow buttons to scroll through other menu items.

Menu Mode options

 SETUP User preference settings

 SYSTEM Thermostat HVAC system settings

 ZWAVE Z-Wave network install or remove

 CLOCK Setting the thermostat time and day

 INFO Displays thermostat version and setup info

SETUP Menu

User preference settings.

FAHRENHEIT OR CELSIUS. Select the temperature display mode.

BACKLIGHT TIMEOUT. Sets the time from last button press that the backlight will turn off. Range:10-30 seconds. Note: long

backlight timeouts will reduce battery life.

If the thermostat is powered from 24VAC, the backlight timeout can be set to “0” which will keep the backlight on continuously.

SENSOR CALIBRATION Change the temperature calibration by +/- 7 degrees.

Use the Up/Dn arrow buttons to change to the desired display temperature.

SYSTEM Menu

SYSTEM TYPE. Select the system type, STANDARD or HEAT PUMP

FAN TYPE (Standard systems only).

Select fan type: GAS (typical default setting) or ELECTRIC

CHANGE OVER TYPE (Heat Pump systems only).

Select the Changeover type:

Changeover WITH COOL (typical default setting)

Changeover WITH HEAT

See Installation Guide for more information on System setup and the Advanced Systems Menu

Press the Menu button to go

to the Menu mode

1135

Fan

Sched

Mode

Run

Auto