User's Manual

Setting the Heating or Cooling Temperature Setpoint

Setpoint Change

To change the setpoint, press the Up or Down arrow buttons. The screen will switch to the setpoint change screen (as above) and

show the current setpoint of the current heating or cooling mode. Adjust setpoint temperature up or down with the arrow buttons.

Note! When in the Setpoint Change screen, pressing the MODE button will switch the setpoint being displayed between

the Heat and Cool setpoints.

Setpoint Push: The cooling setpoint cannot be set below the heating setpoint. The thermostat will “push” the heating setpoint

lower if the cooling setpoint is set below the current heating setpoint. A 3 degree separation is maintained between the heating and

cooling setpoints. The same is true for raising the heating setpoint above the cooling setpoint. The thermostat will “push” the

cooling setpoint up to maintain the 3 degree separation.

Press Up/Down

arrow buttons

to change setpoint

1135

Fan

Sched

Mode

Run

Auto