F31-C user manual
Table Of Contents
- Laser Scanning Sensor User Manual
- 1、Product overview
- 2、Technical parameters
- 3、Series Product
- 4、Mechanical dimensions
- 5、Electrical connection
- 6、Area selection
- 7、software operation
- 8、using the operating
- 9、Assembly requirements
- 10、User Notice
to incline more than 1.5° to prevent mutual interference.
● When two or more sensors are installed on the same plane and in the same
direction, it is recommended to tilt more than 1.5° to prevent mutual interference.
● Due to the cone-shaped scattered emission of the sensor light spot, it is
recommended that the laser obstacle sensor be installed at a height of
≥200mm from the ground. If the installation height is less than 200mm
from the ground, it is recommended to tilt 1.5°.