F31-C user manual

Figure 3.5.4 Only displays the "current work area group"
Figure 3.5.5 simultaneously displays the "current work area group" and "target work area
group" The
origin "O" on the coordinate axis represents the laser emission point. -45° represents
the left boundary of the laser scanning range, that is, the negative half-axis of the X-axis. 225°
represents the right boundary of the laser scanning range, that is, the positive half-axis of the
X-axis. The green sector in the figure indicates the allowable distance range.
The setting of the area outline can be completed during the data monitoring process.
When setting the area in the area group, you need to select the target area level first, that is,
"outermost layer", "middle layer" or "innermost layer". of.