User's Manual

reProducer Epic 5 Active Monitor Speaker
Dear customer, thank you for buying the Epic-5 stereo monitoring bundle! We hope you will have a very enjoyable experience
setting up and using this near-field solution–very likely without ever having to consult this user guide!–In which case you sadly
will also not receive our thanks…
In the case that you do read this guide–which it seems you are about to at this point–we hope it is to gain knowledge beyond
that required to get ready and cracking. So without further ado, here are some suggestions to maximize the value you can
obtain from using your Epic-5 monitors!
Concept of Epic 5
As we decide to make a reference studio monitor for the most purpose without significant compromises, we realize the needed
effort to develop all relevant parts by ourself for the most accurate sound performance.
After nearly 4 years of development, we are ready to present the Epic 5. We achieve all our goals, the best of all properties
what right sound matters,Flat and wide frequency response, fast transient response at all frequencies, high and natural dynamic
range, low noise and low distortion. A good tool to meet right and fast decision in a professional workflow.
CAUTION!
- High sound pressure level can DAMAGE your hearing permanently! Especially at short distances the Epic-5 is able to
generate a significantly higher SPL than the recommended limit for ear protection!
- To prevent compression effects we decided not to use any dynamic limitation. Please make sure to reduce the levels if
you became aware of any DISTORTION!
- Please do NOT expose the speakers to heat, direct sunlight or moisture! Please only use a lightly moistened cloth to
clean the surface of the cabinet.
- Please do NOT attempt to open the cabinet! There are no user serviceable parts inside and you risk getting an electric
SHOCK.
- Please don’t say we didn’t warn you, because we did! And we used CAPITAL letters too!