User guide

In this above image, channel 01 is in video motion alarm record mode and channel 02 is in schedule record mode.
The software will first show the motion record and then show the schedule record and lastly show manual record.
If these indicators are not blinking the channel is not recording.
Audio
The software will also listen to the channel which you have selected. When you click video in the video window
the focused channel will switch and the new channel’s window will show a red borderline, see below.
Mute Audio
When you click the
button you can mute the audio out. The button will show when muted. Simply
click again to un-mute. Our software will save this status of audio mute !
Play Record Files