User guide

Due to the many kinds of display cards available it is possible your specific display card doesn’t support
overlay or yuy2 DirectDraw methods. Please note that changes to these settings will note take effect
until you restart the software.
g) Server Port - Our software have 3 server embedded in it. (1) One is web server, the default port of web
server is 80, but you can change this port to others, such as 800, and can set this web server need to login.
(2) H264 server is for ActiveX viewer and H264WebCam connecting, the default port is 17518. (3)
Stream media server is for RTSP protocol, so you can use Quicktime player or Realplayer, VLC player to
view the video of our software! The default port is 558, so rtsp://xx.xx.xx.xx:558/live.sdp?ch=1 url can
view channel 1 video.
h) Dyndns Domain setting - You can use this function in Trial version, Deluxe version or Exalted version!
Please apply a dyndns domain from http://www.dyndns.com
at first, then you will get a dyndns user name,
password and dyndns domain! Then input these information to below, our software can host this domain
for you! Then you can use IE browser to visit this domain from internet! But you also need to map tcp
port 80, 558, 17518 on your router for your PC which run our Deluxe version software..
i) H264 User setting
After you purchase H264WebCam Exalted version, you can get a registration code. Once you input this
code into the startup page, your software will automatically update to the full Exalted version, at which point
the H264 User will be active!