User guide

need to login when software restore from tray, you can enable “Tray Need Login” item. (3)You can set
the default channels numbers window to display when software starting, such as displaying 1 channel, 2
channels, 4 channels etc. (4)You can set automatically full screen when software starting, or hide to tray
when software starting. (5)Our software can support multi-monitor displaying function, so you can
moving our software from on monitor to another monitor! And can select which monitor to display when
software starting. But the default mode “PC have no Multi-Monitor” can not support multi-monitor, so
you need to change this settings at first if you need this function! (6)You can change our software GUI
size to your needs! Such as 1024*600, 1280*768, 1280*1024, 1920*1080 etc. So if you have wide-screen
monitor, or netbook, you can change this parameter to fit your needs!
d) Record and Snapshot Folder Name - You can input a name, our software will automatically create a
directory using this name to save record files, snapshot jpeg pictures! The default folder name is
TimHO_Rec, you can change this name to yours! But you ‘d better to change this name often, because it
will affect automatically delete the oldest files function! The snapshot quality item will set the quality of
jpeg picture, the minimum quality is 1 and 12 is the maximum. The actual maximum quality may also be
limited by the camera being used.
e) PIP position and automatically switch next page - You can enable “Display Channel FPS” item to display
frames per second for each channel. And you can select a position for PIP display, now our software have
4 position to select, such as R-B is right-bottom corner of the window! If you need to automatically
switch to next displaying page after several seconds, you can set “Display Next Page Every” item to 5
seconds, or 10 seconds etc. Our software will automatically display next channel video every few seconds!
This function is also active for 2, 3, 4, 6, 9, 12, 16, 20, 25, 30 channels displaying window.
f) DirectDraw Method - When there are problems displaying the video feed you may need to change these
settings.