User guide

This dialog’s title will show the current record path. (For example: D:\TimHO_Rec).
a) Login User - All users are listed in the User Information list which displays user name and password. You
can input a user name and password and the channel(s) that can opened from a remote connection. To add
a users click the “Add User” button to create a new user and simply set the appropriate settings for that
user. To change a user’s settings click that user from the list and change the desired parameters. Be sure
to click the “Save User” button after making the changes after each user to insure the changes will be
maintained. To remove a user first click the user from list and then click the “Delete User” button and
they will be removed. You can enable or disable one user to view and PTZ control this channel from
remote!
b) Record Drive - This interface will show all hard disk partitions, USB driver and mapped network driver
in the computer. You can set a drive to record or not. The program will automatically select the drive to be
used and able to receive the recording files. If this drive is full (no space) the program will select another
available drive to record. But you need to notice that this software will not delete the oldest record files
from network driver! We know the record speed of USB driver is slow than hard driver, so you must
assure the recording speed is enough for you. Try and test recording on hard driver at first.
c) Program Start Settings - You can set some start parameters when software begin to run every time! (1)If
you need to login when software starting or exiting, you can enable “Start Need Login” item. (2)If you