User guide

However, you must be sure that you have run our Exalted version at remote, and have host this
H264 user name “timhillone” or “Mike” already! This H264 User is designed for people who use
dial up to connect to the internet and which in turn causes the IP Address to change frequently. If
this H264 User should be valid for remote user connections that are fixed/dedicated like a cable
modem or even a T1. Once you input remote user name and password to access the remote
program be sure to select the desired remote channel which you wish to monitor.
Step 4 - Save Changes
Click the
button to save the changes that have been completed. All channel settings
will be saved for all channels, until you make additional changes and click the save button again. If you don’t
save and just click the Exit button, the software will prompt you to return and perform a save. If you don’t
want to save the changes your settings, you can select Exit and when prompted to return and perform Save
simply select Exit (again) and the software will restore the settings to the state just prior to your entering this
dialog window.
button can delete the settings of selected channel !
button can change the status of selected channel, active status or inactive status!
button can automatically search all ip cameras in your local network! This button
can lead you to the following search dialog: