User guide

You must check your ip camera ‘s setting, and assure the rtsp setting is same as up. And assure the rtsp port is
right! If you need to reverse the pan tilt function, you can enable the “Pan Reverse” item or “Tilt Reverse” item.
In Channel setting main window, the channel list displays the current running settings or those saved following the
last setup. To change a channel’s setting follow the steps listed below.
Step 1 - You must be sure to select a Total Number of Channels that is greater than 1. If you want to change the
channels number, you need to select the number in list, then click “Change” button to activate it!
Step 2 - Select the particular channel you want to change from the list of available channels.
In the graphic shown below, the selected channel is channel 3. This channel is setup for net, connecting a D-Link
ip camera DCS-920. You need to input ip address 203.125.227.73, and the web port of this ip camera 80, fill user
name to dlink, password to dlink . Select D-Link ip camera in list, and select DCS-920 item.