User manual

Network USB over IP Server With 1-USB2.0 Port
19
3. Right-click on the USB device that you want to connect to and select “Connect Device” to
establish the connection. You will see the device driver is installing and the status will show
at the bottom right corner on your system tray. This message will disappear once the driver
has been installed.
After the installation is completed, the USB device will become available as if it were directly
connected to your computer.
2.9 Setting up Auto Connection/Auto Disconnection
1. Right-click on the device that you want to set up auto connection feature.
2. From the pop-up shortcut menu, you can:
￭ Select the Connect Device Automatically option so that the device will be connected
automatically when the system starts.