Manualshelf

User manual

ManualsBrandsRepotec ManualsComputer equipmentRP-WR1134
11121314151617181920
Network USB over IP Server With 1-USB2.0 Port
16
2.7 Setting the Network USB over IP Server by Setup Utility
1. To configure the Network USB over IP Server by setup utility, right-click on the USB over IP
Server and select “Server Configurations”.
2. A Server Setting window will be displayed. You may set the DHCP (default), IP address and
password. Moreover, you can upgrade the firmware and reboot the Network USB over IP
Server.