User manual
Network USB over IP Server With 1-USB2.0 Port
13
2.4 Disconnecting an USB Device
To disconnect an USB device, simply click on the connected USB device on the list of the
Network USB over IP Server setup utility, and press the “Disconnect Device” button. The device
will then no longer stay connected to your computer, however, you may reconnect the USB
device again once the icon becomes blue (
).
2.5 Connecting to an USB HUB
1. If you have more than one USB device that you would like to share over your network, you
may add an USB HUB (4-port maximum) to the Network USB over IP Server.
2. Connect the USB cable of the USB HUB to the USB port on the Network USB over IP
Server, and then connect the USB device(s) to the USB ports on the USB HUB. Make sure
the power adapter of the USB HUB is plugged in and powered on.
Note:
Network USB over IP server only can support up to 4 USB devices through an USB
HUB and certain USB devices require a direct connection to your computer in order to
function at full capacity. Please make sure the USB HUB which should be provided
extra-power.