User manual

Network USB over IP Server With 1-USB2.0 Port

4. When prompted, restart your computer. After rebooting, you will see a new icon on your

desktop. Double-click the icon and it will bring up the Network USB over IP Server setup

utility.

5. The setup utility will show up and display all the active Network USB over IP Server on your

network. In this screen, you will see the product listed as “USB over IP Server-2DD9DB

(192.168.1.153)”. The “2DD9DB” is the last 6 digits of the Network USB over IP Server’s

MAC address, and the “192.168.1.153” is the Network USB over IP Server’s IP address.

2.2 Connecting to an USB Device

1. Connect the USB cable on your USB device to the USB port of the Network USB over IP

Server, and make sure both the USB device and the Network USB over IP Server are

powered on. The USB device will then show up on the Network USB over IP Server utility as

a blue icon (

). The blue icon indicates that the USB device is ready to be connected.

If for any reason the USB device does not show up, please click the “Search” button to

refresh the list.